Original size 1239x1752

Fabr

PROTECT STATUS: not protected
Longread translated automatically

WARMTH — a brand of unique and decorative candles inspired by Saint Petersburg. The core idea of the brand is to choose decor you love and keep the memory of your favorite city alive.

big
Original size 1424x752

Diameter 90 mm
Height 75 mm

Fill volume reference: 220–260 ml
Distance to the rim: 5–7 mm from the top edge
Wick: One, placed strictly in the center (type to be determined by testing)
Relief: On the top surface
Height: Approximately 1.5–3 mm
Lid: Designed for actual fit on the cup (separate component).

How to Make It?

For the pilot sample, a separate silicone mold for the architectural ornament is proposed. The thin decorative wax detail is cast in the mold and attached to the surface of the candle using a compatible adhesive.

What to confirm with the workshop?

Ask for samples of the glass and lid, the wax passport, recommendations on wicks and fragrance load, and confirmation of the compatibility between the decorative relief and the base pour. Separately, check the stability of the glass coating to heat.

Manufacturing Process

The following sequence is proposed for a small run. This is a technological hypothesis that will need adjustment based on the results of a test batch.01 / Preparation Clean and inspect the jar; secure the wick holder in the center. Prepare the mold for the architectural relief.02 / Mixture Selection Melt the wax according to the manufacturer’s instructions. Incorporate the compatible colorant and aromatic blend within the recommended temperature range.03 / Base Pour Pour the base volume into the jar, leaving a technical gap from the rim. Allow it to cool to the required stage.04 / Decorative Layer Fabricate a thin relief element in a silicone mold. Combine it with the central wick and affix it to the surface.05 / Curing Allow the candle to stabilize according to the wax manufacturer’s recommendations. Trim the wick to the recommended length.06 / Inspection Check the geometry, color, integrity of the relief, and lid fit. Conduct a burn test before approving the production run.
Fabr
Project created at 29.10.2026
We use cookies to improve the operation of the website and to enhance its usability. More detailed information on the use of cookies can be fo...
Show more