A plate of serenity and culinary pleasure. The smooth typeface evokes the flow of water, and the blue color and undulating line reinforce the idea of slowing down.
Dimensions
The outer diameter, overall height, thickness of the base and rim, support dimensions, and engraving depth must be specified.The plate diameter is 260 mm. Overall height with the stem is approximately 27 mm. Engraving width is approximately 191 mm. Engraving depth is approximately 0.9 mm. Base thickness at the center is approximately 12.8 mm. Thickness near the outer edge in the verified cross-section is approximately 3.4 mm. The ring stem on the reverse side features a rounded profile and a smooth transition into the plate body. The maximum height of the stem protrusion relative to the adjacent surface is approximately 6 mm. The diameter of the stem at the midpoint of the protruding ring is approximately 176 mm. The outer diameter of the transition zone from the stem to the plate is approximately 208 mm.
Proportions
The plate has a shallow profile: its height is about 9% of its diameter. The rim rises smoothly toward the edge.
Surface
The front surface must be smooth, with a seamless transition from the center to the rim. No grid lines, sharp edges, or random irregularities should be perceptible on the finished product.
The dark blue areas are part of the surface design. The color in Blender does not determine the composition of the actual coating; for production, you must separately select a decorative material and a coating designated for food-grade tableware.
Protrusions and Recesses
The lettering is executed through recessing. The corporate typeface features delicate terminals, small internal voids, and narrow joins—these are precisely the areas that require the most careful inspection.
At a nominal diameter of 260 mm, a depth of approximately 0.9 mm is already noticeable. It is necessary to assess the ease of cleaning the characters and how they will appear after the coating is applied.
The wavy line is currently created by a separate, thin surface over the plate. If this is intended as a painted design, it should be noted in the manufacturing documentation as color decoration, rather than a separate protruding element.
Undercuts and Negative Angles
The general profile of the plate is open, without a distinctly rolled-in rim. However, this is not enough to confirm the absence of all undercuts.
It is also necessary to check the walls of the engraving and the outer profile relative to the direction of extraction from the mold. Narrow elements of the letters must not snag on the mold.
Product Future Sustainability
Beneath the plate is a circular support zone. Its outer diameter is approximately 42% of the plate’s diameter—about 109 mm when the nominal product diameter is 260 mm.
